WLIVE Fabric 3-Drawer LED Nightstand with Charging Station

My son wanted something to put his ps5 onto, his old table was a short kids table and the cat would get on top of his ps5 and he didn't like that. I really lucked out with this stand because I didn't get measurements of the ps5 first, just assumed it could at least hold a ps5. And it did! Just barely (see picture) but it works.Assembly was not a chore, the instructions were in fairly clear english and pretty decent reference images. I did see where another reviewer commented on one of the first steps of putting the piece where the outlet mounts to the top shelf, it was a little confusing. So when you put this together, when you attach those two pieces, you should see the same colors when you look at it from the top or the bottom, if it's not all black on one side and brown on the other, it's probably backwards. Overall the assembly went fine. Does require a screw driver and I didn't use the included allen key, used one from my tools that works better for me. Total assembly time was maybe 40 minutes? Go easy on the tightening, I didn't have any issues, but you have to be careful not to strip out a hole with these wood pieces. Also the screws you use to mount the power outlet should be the small black ones, not the small silver ones.Many extra pieces included, even another handle! I think at least one extra of every hardware piece, will make for easy repairs in the future if needed. The only ask I would have for this is the back panel to have a hole on the left or right to allow cables to pass through. Cables have to go up and over if something needs a connection. Not a deal breaker though, as we're asking a lot of this nightstand 😁We like this stand, 5 stars.

Everything was wrapped individually, the instructions were clear (easy to build), and it’s very sturdy. It’s a cost effective item, whether you need a nightstand, a small dresser, or a side table. This piece works great for small spaces and keeps everything you need within arm’s reach.

This was easy to put together. But in my video, I didn’t mention about. I wish I would’ve paid more attention to which side I was putting this. Nightstand because there’s a button for on and off of the power source and I put it on the opposite side.On the last photo, I actually reinforced the drawers by going to the dollar tree and I found the perfect size plastic square container. It fit in perfect so all three drawers are really strong.I’m really happy with this. I was looking for something where I could put my CPAP that wouldn’t interfere or get in the way of my lamp and this was perfect

false

First, this is a great stand, once assembled. I accidentally overtightened the screws into the top board and when the side leaned over ( before being connected to anything else it pulled the bolts and anchors out. But I was able to take the anchors out of the wood, trim off the cracked part and it went back together. The directions say 2 people needed, I imagine that's why, so you don't really need 2 people, you just need to be able to prop up the sides while working on it. I also appreciate that this came with all the parts individually wrapped and clearly labeled. It even comes with small tools but it's better to use your own full size ones it will go much faster. The Allen wrench works but a hex bit in your screw driver works alot better. It's not hard to assemble, just takes time. There are different extra pieces left over but the instructions don't have them listed on the parts list. The directions say to follow every step exactly, but I believe if I get another one-which I'm now thinking about, I would change the order, I would put the bottom and metal frame together first to keep the pressure off the wood. Once the frame is stable on its own it would be easier to lay it down and then screw your 2 wood pieces into place. One thing it didn't label was the 2 wood shelf, just be sure to check for the 3 small holes in the middle of one, that's the top of the stand, they are for the underside so you can screw in some little plastic clips to hold the light strip- but it's stuck on with its tape anyway. The other board looks exactly the same except for that. The drawers have back stops but nothing in the front, so the drawers just pull all the way out. It comes with adjustable feet, just screw in and you can use to level if needed. The lights control is on the cord, there's a clip you can stick on to hold it, but I don't know where to put it yet. The lights are cool and you can cycle through the modes to find what you want by just pushing that button. It's really nice to have the outlets and usb ports built on. The cord is a decent length but I didn't measure it, it's at least 6 ft though. I really like everything this came with and how organized it is. Even includes anchors for the wall and holes in the frame already for attaching them however, the screws are not long enough. By the time yiu put those screws in through the metal frame, they are not long enough to clear past the distance between the stand and the wall, because you need to consider the extra depth of the power block that sticks our the back, from the outlet box. So this needs longer anchor screws to reach and bite the wood. Bottom line after finishing assembly, is that is is a good space saving, nice looking and pretty sturdy nightstand, and at a fair price. The top is higher than average and would be just right for the newer taller beds, or a corner table or anywhere, love the colors, USB, and sturdiness, it's nice looking and it would make a nice gift. I hope this info has been helpful.